Connection Instructions
Youcan use your LCD-TV as a monitor for your personal computer using a VGA
cable(not supplied).
VGAInput
Connectionand use steps:
1.Readthe user guide supplied with
yourcomputer and ensure that it has
aVGA connector;
2.Makesure that the power of the LCD
-TVandthePCareoff;
3.ConnectaDtype15-pinVGAinterface
cable( not supplied ) to the VGA video
interfaceconnector on the PC. Then
connectthe other end to the PC video
interfaceconnector on the back of the
LCD-TV.Tightenthe screws on the VGA
connectorsonce they are firmly
connected,connect the audio cable(not
supplied)tothe audio input on the back of
yourLCD-TV;
4.Turnon the power of the LCD-TV first ,
andthen turn on the power of the PC;
5.Pressthe buttonto set the video
inputmode of the LCD-TV to PC;
6.
SOURCE
Checkthe image on your TV. There may be noise associated with the resolution,
verticalpattern, contrast or brightness in PC mode. If noise is present, change
thePC mode to another resolution, change the refresh rate to another rate or
adjustthe brightness and contrast on the menu until the picture is clear. If the
refreshrate of the PC graphic card cannot be changed,change the PC graphic
cardor consult the manufacturer of the PC graphic card.
Framefrequency (Hz)Linefrequency (Khz)
VGA
SVGA
XGA
640*480 31.5KHz 60Hz
800*600 37.9KHz 60Hz
1024*768 48.4KHz 60Hz
Mode Resolution
Note:All above listed are subject to VESA Criteria.
YPbPrInput
Connectthe DVD video outputs (Y, PB, PR)
totheCOMPONENT(Y,Pb,Pr)INsocketon
theTV and connect the DVD audio outputs
tothe AUDIOIN jacks on the TV, as shown
inthe figure.
Ifyour DVD player does not have
componentvideo output, use S-Video.
1.Turn on the DVD player, insert a DVD.
2.Use the buttonon the remote control to select
Howto connect
NOTE:
Howtouse
SOURCE
VGAIN