Haier L42A18 owner manual DVD connection

External Equipment Connections

DVD connection

How to connect

1. Connect the DVD video outputs (Y, Pb/Cb, Pr/Cr) to the HDTV IN jacks on the TV and connect the DVD audio outputs to the HD-AUDIO jacks on the TV, as shown in the figure.

2. If your DVD only has an SCART output jack, connect this to the SCART input on the TV. as shown in the figure.

Y	Pb/Cb	Pr/Cr				HD-AUDIO
		IN2	SCART2	SCART1	ANT IN	PC/DVI
			Y/C	RGB		AUDIO IN
		IN1
Y	Pb/Cb	Pr/Cr				HD-AUDIO

How to use

1. Turn on the DVD player, insert a DVD.

2. Use the TV/AV and VOL+/- button on the remote control to select SCART1 or SCART2 mode.

3. Press Play button on external equipment for program play.

4. Refer to the DVD player's manual for operating instructions.

		Y	Pb/Cb	Pr/Cr	HD-AUDIO
HDMI/DVI	HDMI/DVI	PC IN		IN2	PC/DVI
IN1	IN2				AUDIO IN
				IN1
		Y	Pb/Cb	Pr/Cr	HD-AUDIO

or	RGB-DTV OUTPUT R AUDEO L	or
HDMI/DVI OUTPUT		Y Pb Pr	R AUDEO

or

DVD

DTV connection

-To watch digitally broadcast programs, purchase and connect a digital set-top box.

How to connect

Use the TV`s YPbPr IN and AUDIO IN jacks, PC or HDMI/DVI VIDEO port for video connections, depending on your set-top box connections available. Then, make the corresponding audio connections.

How to use

1. Turn on the digital set-top box. (Refer to the owner`s manual for the digital set-top box.)

2. Use TV/AV on the remote control to select HDMI mode.

3.Press Play button on external equipment for program play.

Digital Set-top Box