CDA WF250SS manual Locked programme access, Anti-overflow system, Anti-leak protection system

9/ YOUR DISHWASHER’S SAFETY SYSTEMS

•Locked programme access

While the programme is running, the programme selection switch is automatically locked and can- not be changed. It will unlock automatically when the programme ends or is cancelled.

•Anti-overflow system

This system activates the drain pump automatically if the water in the tank reaches an abnormal level.

•Anti-leak protection system

This system cuts off the water supply if a leak is detected under the appliance.

Note:

To unlock, press the Start/Cancel button and hold it down for three seconds.

Important: -> Error in programme or malfunction:

Refer to Section 13 / If the machine does not operate normally.

The indicator lights flash to denote errors as follows:

Wash Rinse Dry End

Wash Rinse Dry End

Wash Rinse Dry End

Wash Rinse Dry End

Check that the tap is open. (d01)

The dishwasher is not emptying. Several possible reasons: refer to Section 9, paragraph headed “Programming, display”. (d02)

The dishwasher’s anti-leak system is active: call a technician. (d07)

Several possible causes: refer to Section 9, paragraph “Malfunction”. (d12)

25