12/ CLEANING YOUR APPLIANCE
• CLEANING THE WASTE FILTERS
The filtration system consists of several elements:
A- The waste filter
B- The large main filter
C- The micro filter
The filters are located in the centre of the tub and must be washed regularly to obtain opti- mum washing results.
Actions :
➀Before removing the filters, remove any waste on the large main filter B with a sponge so that the waste does not block the sprinkler arms. Rotate the spray arm as shown in the drawing. (Fig. 14)
➁Loosen the waste filter a quarter of a turn and then remove it A
③Remove the main filter B
④Remove the micro filter C
⑤Carefully clean filters A , B and C under running water (Fig. 15)
Re-installation:
Proceed in reverse order, inserting filters C and B and then A
Important :
Remember to lock the waste filter A in place by pushing it in fully and turning it a quarter turn.
➀
ABC
➁
A
③
B
④
C
Fig. 14
⑤
ABC
Fig. 15
29
