11/ PROGRAMMING
Wash Rinse
| STOP |
| |
Bio 50° | Eco 55° | ||
Rapid | Normal 60° | ||
30' | |||
|
| ||
Soak | Intensive 65° | ||
WF250SS | Select | ||
|
| ||
|
|
| 9h | Delay |
|
|
| 6h | |
|
|
| Timer | |
Dry |
| End | 3h | |
|
|
Antibacterial
Rinse Aid
Salt
START |
|
Cancel | Class A |
Fig. 02 | A | B | D E | C |
|
Advice:
Consult the Programmes table on the preceding pages to determine the programme you need for the type of items, the quantity and the amount of food residue.
•Running the programme immediately
Select your programme by turning the selec- tor switch A .
Press “Start” E : the programme begins. The indicators light up as the programme pro- gresses.
•Delaying a wash programme
You can program a delayed start by pressing the “Delay Timer” C button.
Confirm by pressing “Start” E .
Note:
The electrical safety devices on the door may cause the indictors to light briefly when it is opened or closed, even if the selector switch is set to “STOP”.
This does not affect the operation of your appliance.
As required, and in particular after adjusting the water softener, the resins may be regene- rated during the first three minutes of the programme.
There is no noise during this process.
•Antibacterial “4-in-1”:
Use this button to optimize the dishwasher’s washing cycle depending on the type of multi- purpose tablet, and to ensure your dishwasher is treated for bacteria.
•Switching the appliance off
When the programme has finished, turn the selector switch to “STOP” A .
•Cancelling a programme
Press the “Start Cancel” button E and hold down for several seconds.
Antibacterial
28
