Basic Receiving and Playing Operations
to confirm the switching to TV input terminal. After switching, the signal source menu disappears, and at the upper right corner of screen displays the information of current signal source.
Pressing this key repeatedly can exit from the signal source menu.
In case of no other operation, the signal source menu will automatically disappear upon reaching the OSD disappearance time preset in the main menu.
Source
TV
AV1
AV2
Component 
PC
HDMI1
HDMI2
USB
:Move OK 
:OK
Searching Channel
In this section, how to use the remote control to set channel is explained. You can also use buttons on the TV set to set channel.
Channel Edit
Note: Only available in the source of TV and Tuning lock in the H.Lock menu is off.
APress MENU on the remote control unit or MENU on the TV’s front panel to display main menu, and then press 3/4 to select Tuning menu.
BPress 5/6 to select the Channel Edit
option, and then press OK to enter submenu.
Channel Edit
| Search | 112.25MHz |
| Fine Tune | 112.25MHz |
| Color system | PAL |
| Sound system | DK |
| Skip | OFF |
|
| Menu Return Move OK OK |
|
|
|
❖❖ Search |
| |
Press 5/6 to select the Search option, and finally press 3/4to start manual search. Upon finding a program, the search will automatically stop, and the program will be stored onto the current channel. You may stop the search by pressing OK or MENU.
❖❖ Fine Tune
Press 5/6 to select the Fine Tune option, and then press 3/4 to start UP or DOWN fine tuning until obtaining a relatively good picture effect. The fine tuning function is for the purpose of improving picture effect through fine tuning when that of a certain program is not good enough. Normally, the optimal picture effect can be obtained without fine tuning when watching TV programs, and fine tuning is to meet the need of adjusting a certain program.
❖❖ Color system
Press 5/6 to select the Color Systems option, and then press 3/4 to select correct color system.
The TV is designed with four systems for your choice, i.e. Auto, PAL , SECAM, NTSC and NTSC443. Generally, the system is set as Auto and it is not necessary to make an adjustment. The system is normally set as Auto during auto search.
❖❖ Sound system
The TV is designed with four systems for your choice, i.e. D/K, M, B/G and I. Generally, it is not necessary to adjust the system. The system is normally set as DK during auto search.
❖❖ Skip
When the skip is set ON, the channel will be skipped when pressing CH ∧ or CH ∨ and only can be selected by pressing
LCD television Owner’s Manual 13
