This means the adjustment of specific contents in the picture, if already in normal condition, it is not necessary to make any adjustment.
Due to different TV signal inputs, some items may need to be adjusted. The following makes a description by only taking TV signal as an example.
How to select the picture mode
1.Press MENU to display main menu on the screen, and then press 
/ 
to select the Picture menu, afterwards press 
/ 
to enter the option to be adjusted.
2.Press 
/ 
to move the cursor to the option to be adjusted, and then press 
/ 
to select Standard/Bright/Soft/User/Eye Guard mode.
You can also press P.MODE on the remote control to select Standard/Bright/Soft/ User/Eye Guard mode.
Standard: The picture brightness and hue are moderate.
Bright: The picture is vivid, bright and dynamic.
Soft: The picture is soft and in light color.
User: The picture effect is set by yourself to your preference.
Eye Guard(The option does not exist when using a USB device.): In line with the change of using environment, the TV set will adjust automatically the image display mode to protect viewers' eyes from any negative impact.
How to customize your own picture status
1.Press MENU to display main menu on the screen, and then press 
/ 
to select the Picture menu, afterwards press 
/ 
to enter the option to be adjusted.
2.Press 
/ 
to move the cursor to the option to be adjusted, and then press 
/ 
to adjust it to your desired effect.
Brightness: This will adjust the light output of the complete picture, which will mainly affect the darker areas of the picture.
Contrast: This will adjust the intensity of bright parts in the picture but keep the dark parts unchanged. Sharpness: This will adjust the sharpness of fine details in the picture.
Hue(select able in NTSC mode only): Allows you to select the color mix (Tine) of the picture.
Chroma: This will adjust the saturation level of the colors to suit your personal preference.
menu
menu
Picture Mode: Select the mode of picture(Standard/Bright/Soft/User/Eye Guard)
Palette: Press 
/ 
to select the Palette option, and then press 
to enter its submenu, and finally press 
/ 
to select a toner pattern from six patterns (User, Standard, 6500K, 7300K, 8500K and 9300K) to your color preference. Normally, the Standard mode is selected.
If the User mode is selected, press 
/ 
to enter the palette menu, (as shown in the right figure), and then press 
/ 
to select a benchmark in the range of 2500K15000K from warm color to cold color, afterwards press 
/ 
to adjust; if a different benchmark is selected for adjustment, the original adjustment data will be automatically cleared.
Reset: Return to factory default settings.
