1.First, connect power cord correctly and the power indicator will light.
2.Press POWER on the remote control again.
3.If you want to exchange to standing by status, please press down POWER on the remote control.
4.Disconnect the power supply or unplug the television if it is intended to completely cease the television performance.
When you satisfied with your set for the first time, you must select the language which will be used for displaying menus and indications.
1. | Press MENU and / to select Function menu. |
| menu |
|
|
|
| Language | English |
2. | Press / to select the Language. | Blue Screen | On | |
Menu Timeout | 15s | |||
|
|
| AAA Picture Optimize |
|
|
|
| DSM | Demo Off |
3. | Select a particular language by pressing repeatedly. | Eye Guard Mode |
| |
Tetris |
| |||
|
|
|
|
|
4. When you satisfied with your choice, press MENU to return to normal viewing.
If the TV is not in TV mode, press SOURCE on the |
| |
remote control unit, and signal source menu will be |
| |
displayed on the TV screen (as shown in the right figure). | Source | |
Press / to select the TV option, and press or OK to | TV | |
confirm the switching to TV input terminal. After | AV1 | |
AV2 | ||
switching, the signal source menu disappears, and at | ||
the upper right corner of screen displays the information | ||
YPbPr/YCbCr1 | ||
of current signal source. | YPbPr/YCbCr2 | |
Pressing this key repeatedly can exit from the signal | HDMI 1 | |
source menu. | HDMI 2 | |
HDMI 3 | ||
In case of no other operation, the signal source menu | ||
PC | ||
will automatically disappear upon reaching the OSD | ||
USB | ||
disappearance time preset in the main menu. |
| |
|
