Haier TCR20, TCR13, TCF20 owner manual DVD System Setup, General Setup, Aspect Ratio Description

DVD System Setup

DVD System Setup

General Setup Process

1.Press the SETUP button, the General Setup Page,Preference Page will be displayed in turn.

2.Press	or	to select, the
item, then press		to enter the
submenu.

3.Press or to select then press PLAY/ENTER to confirm.

..General Setup Page..

TV Display	LB	4	.
			3:Ps
Angle Mark	On	4	.
			3:Lb
OSD Lang	ENG 16		9
Spdif Output
Caption	On

Screen Saver Off

4.Press EXIT key or press SETUP repeatedly to exit the set-up menus.

..Preference Page..
Parental	1 Kid Saf
Password	2 G
	3 Pg
Default
	4 Pg 13
	5 Pgr
	6 R
	7 Nc17
	8 Adult

SETUP

PLAY/ENTER

SETUP

PLAY/ENTER

General Setup Page

ASPECT RATIO DESCRIPTION

When using the DVD with the internal TV,

select 4 3/LB.

The following information applies only	..General Setup Page..
when the DVD output is connected to an	TV Display	LB	4	.
				3:Ps
	Angle Mark	On	4	.
external TV.				3:Lb
	OSD Lang	ENG 16		9
	Spdif Output
4:3/PS (PS = Pan and Scan)	Caption	On
You may select if you have a normal aspect	Screen Saver Off
ratio (4:3) TV, although the NORMAL/LB
(letter box) is a more common choice. In PS

mode, widescreen material will fill the screen, but at the expense of chopping off extreme left and right edges of the original film picture. For this feature to work, the disc must be specially coded. Such discs are uncommon.

4:3/LB (LB = Letter Box)

You may select this if you have a normal aspect ratio (4:3) TV. Widescreen material will be shown in pure unaltered form, allowing the entire picture area of the original film to be viewed without any side cropping. Black bars will appear above and below the picture.

16:9

You may select this if you have a widescreen (16:9) TV. Back bars may still appear above and below the picture even if using a widescreen TV. This is because some film directors prefer to use ultra widescreen aspect ratios e.g. 2.35:1. This will normally be indicated on the DVD packaging.

38