Antenna connections

If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a cable TV service (CABLE), see the Cable TV connections.

Combination VHF/UHF antenna (Single 75 ohm cable or 300 ohm twin-lead wire)

RF IN

RF IN

jack

jack

75 ohm coaxial

cable

300-75 ohm matching transformer

Connect the 75 ohm cable from the combination

VHF/UHF antenna to the RF IN jack.

If using a flat UHF 300 ohm twin-lead wire, connect these flat wires to an optional 75/300 ohm matching transformer/adapter (available at many retailers), and then connect the adapter to the 'RF' IN connector on the back of the television.

Combination VHF/UHF antenna (Separate VHF and UHF 300 ohm twin-lead wires)

RF IN

300-75 ohm

jack

matching

 

transformer

Combiner

 

Connect the UHF 300 ohm twin-lead wire to the combiner (not supplied). Connect the VHF 300 ohm twin-lead wire to the 300-75 ohm matching transformer. Attach thetransformer to the combiner, then attach the combiner to the RF IN jack.

UHF 300 ohm

VHF 300 ohm

Separate VHF/UHF antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)

Connect the VHF 75 ohm cable and UHF 300 ohm

RF INtwin-lead wire to the combiner. Attach the combiner jack

to the RF IN jack.

VHF 75 ohm

Combiner

UHF 300 ohm

9

Page 10
Image 10
Haier TCR13, TCR20, TCF20 owner manual Antenna connections