Water inlet hose
Water level indicator

Install the water inlet hose; Select the water level

Insert the water inlet hose into the water-filling entrance on the control panel directly.(pull it out to dismantle it)

Select water level according to the quantity of the laundries.

Set the water level adjusting lever to needed line.

Water inlet

Use the new water inlet hose provided with the machine to connect to the water faucet.Old hose sets should not be reused.

Maximum Max.

Med

Medium

Minimum Min

Quick water-filling entrance

You can fill

water into the

wash tub directly

Quick water-filling entrance

 

through this

entrance. It

can reduce the

 

humidity inside the control panel significantly

and prolong the operating life of the components.

Water inlet hose

Insert the water inlet hose into the water-filling entrance, then push the water-filling jointer into the quick water- filling entrance. (To dismantle the water inlet pipe, just push the control handle as indicated in the figure and pull it out)

Water inlet jointer

Push

Control handle Quick water-filling entrance

6

Page 8
Image 8
Haier Twin-tub Washing user manual You can fill