Haier WD55dHSHAT user manual Washing sequence

Washing sequence

Water-filling selector handle

Overfilling sign

Wash timer	Wash selector	Water-filling entrance	Buzzer	Spin timer
(To set to below 2 minute,	(Standard current,	(The buzzer will ring when		(to set to below 1 minute,
first set to 6 minute then	strong current)	the	washing finishes)	first set to 2 minute then
turn it back. it can increase				turn it back. it can increase
the service life of the timer).				the service life of the timer).

15

12

WASH TIMER

STRONG

OFF STANDARD

3

DRAIN

6

WASH SELECTOR

9

OFF

5

MAX 4

BUZZER

OFF

1

2

3SPIN TIMER

Wash

1.Water inlet selector

(1)Set the water inlet selector at the "WASH" side. (Figure 1)

(2)Set the water level adjusting lever to needed line.

2.Fill the water and add the dissolved washing powder to make the water level reach the preset position. (Figure 2)

Run washing program for some time to stir and dissolve the powder completely.

3.Put in the laundries. If the water quantity is insufficient, please add water.

4.Select the current.

Select the strength of the current according to the laundries. (Figure 3)

WASH SPIN

Figure 1

Figure 2

STRONG

STANDARD

DRAIN

WASH SELECTOR

Figure 3

OFF

5.Select the washing time

Select the washing time according to the laundries. (Figure 4)

WASH TIMER

Figure 4

6.After washing, the buzzer will ring. Set the "WASH SELECTOR" at "DRAIN". (Figure 5).

STRONG

STANDARD

DRAIN

Figure 5

WASH SELECTOR

8