4.Cut food to fit food chute. Pack food chute tightly with food. Insert food pusher in chute. Always use the food pusher to feed food into the chute. NEVER PUSH FOOD THROUGH CHUTE WITH HANDS.
5.Plug in unit and process food.
6.Select speed. While pressing on
food pusher, push ON ( l ) or
PULSE 
to process food.
7.When food chute is empty, push OFF ( O ) or release from PULSE 
position. Wait until blade has stopped rotating before removing cover.
Continuous Processing
IMPORTANT: When using the continuous feed chute the food gate must be removed and the continuous feed disc must be in place.
1.Make sure the Control Switch is turned to OFF ( O ) and the unit is unplugged.
2.Lock the bowl onto base. (See “How to Lock the Bowl” on page 5.)
3. Place the continuous feed disc, ribbed side up, onto the motor shaft. Turn the disc slowly until it drops into position (level with top of bowl).
Continuous
Feed Disc
Motor Shaft
4.Select desired side of reversible slicing/shredding disc and place that side up on the motor shaft.
Slicer/Shredder
Disc
5.REMOVE FOOD GATE FROM CONTINUOUS FEED COVER TO PREVENT DAMAGE TO UNIT.
6.Lock on cover. (See “How to Lock the Cover” on page 5.) Place bowl under feed chute.
7.Plug in unit and select speed. Process food. Check the continuous feed chute frequently to make sure the opening is not blocked. If blocked, turn unit off and unplug. Clear blockage, then reassemble and continue processing.
NOTE: When using the continuous feed chute, some food may fall into the food processor bowl.
Hint!
We recommend not using the continuous feed chute feature when shredding root vegetables (carrots, potatoes, etc.). As with most continuous feed processors, shredded moist vegetables may clog in the chute. It is best to shred these vegetables into the food processor bowl. Slicing these root vegetables while using the continuous feed chute will not present a problem.
Motor Shaft
7
