Hamilton Beach 840117800 manual Filter Tip, Humidifier Assembly, Filling the Water Tank

Models: 840117800

1 24
Download 24 pages 44.06 Kb
Page 5
Image 5
Humidifier Assembly

840117800 Ev00 8/27/03 11:14 AM Page 5

Humidifier Assembly

1.Insert the water tray into the humidifier base. Be sure that it

is securely seated in the indent in the base.

2.Place the filter on the water tray as shown.

Filling the Water Tank

1.Remove the filler cap on the bottom of the tank by turning it counter-

clockwise until the

UNLOCK arrows line up with the ridges on the tank.

2.Fill the tank with COOL tap water.

DO NOT USE HOT WATER.

Be sure to keep the tank free of debris.

3.Replace the filler cap and turn clockwise

until the

LOCK

arrows line

up with the

ridges on

the tank

opening. Return the tank to an upright

position. When carrying the tank, use the carry handle and support the tank from the other side.

NOTE: Always make sure the filler cap is locked and the gasket is in place before inverting water tank.

NOTE: Using distilled or deionized water will prolong the life of the filter.

Never place oils, scents, or perfumes in the water tank.

Filter Tip!

To prolong the life of the filter, it is recommended that you turn over the filter each time you fill the water tank. Replace the filter when it displays mildew or becomes stiff and non-absorbent.

5

Page 5
Image 5
Hamilton Beach 840117800 manual Filter Tip, Humidifier Assembly, Filling the Water Tank