840117800 Ev00 8/27/03 11:14 AM Page 6
Placing the Water Tank on the Base
Lower the tank into place until it is properly seated, using the fan
enclosure and the base to align the tank.
IMPORTANT! Never pour water into or allow water to splash into air intake or exhaust grilles.
NOTE: Some water will flow out of the tank and into the water tray when the tank is in position.
CAUTION: Once the humidifier has been filled, do not attempt to tilt or move it. If it is necessary to move the humidifier, make sure it is unplugged and remove the water tank first.
Plugging in the Humidifier
WARNING: To reduce the risk of electrical shock, never plug in the humidifier while your hands are wet! Once the humidifier has been assembled and placed in its final location, and the tank has been filled, plug the humidifier into a wall outlet.
NOTE: The polarized plug will only fit in one
to force the plug! If you are unable to insert the plug into the outlet, try reversing the plug. If the plug still does not fit, contact a qualified electrician to replace the obsolete outlet.
Setting the Controls
Setting the fan speed
Turn the fan speed knob to the desired setting. To increase the humidity in a room more quickly, set the knob to HI. For quiet, nighttime operation or for a more gradual increase, set the knob to Quietmist™.
Indicator lights
The power on indicator will light to indicate that the humidifier is on.
1.Fan Speed Knob
2.Power On Indicator – lights when unit is on.
6
