840143800 ENv03.qxd 1/6/06 9:05 AM Page 9
Quick Cleaning
Quick cleaning should only be used to rinse the blender between batches of processing the same food. When the processing of a single type of food is finished, the blender should be disas- sembled and thoroughly cleaned as instructed in “How to Clean.”
To quick clean, pour 2 cups (500 ml) warm water in jar and add 1 drop liquid dishwashing detergent. Run the blender on ICY DRINK for 10 seconds. Flush soapy water through dispenser until cleaned.
Discard soapy water. Rinse blender jar with clean water. Flush clean water through dispenser until cleaned.
This function is not a substitute for regular cleaning as instructed in “How to Clean.” This function should never be used when blending any mixture containing eggs, milk, or any other dairy products, meats, or seafood.
Troubleshooting
POTENTIAL PROBLEM | PROBABLE CAUSE/SOLUTION | |
|
|
|
Blender leaks. | • | Make sure outer and inner jar are assembled |
|
| correctly. |
| • | Tighten cutting assembly on jar. |
| • | Make sure gasket is in place on cutting assembly. |
|
|
|
Ice not crushed. | • | See ice crushing instructions in “Blending |
|
| Specific Foods” section. |
|
|
|
Does not blend well. | • | Make sure enough liquid has been added. A |
|
| minimum of 8 ounces (250 ml) is recommended. |
|
|
|
Does not dispense. | • | Make sure blender is ON. |
|
|
|
Spout leaks. | • | Tighten dispenser cap. |
|
|
|
Cannot remove | • | Loosen collar by holding jar and tighten cutting |
cutting assembly. |
| assembly counterclockwise. |
|
|
|
9
