840154600 ENv06.qxd 10/26/06 11:37 AM Page 4
How to Operate
1.Make sure the unit is unplugged. Place base on clean, dry surface.
2.Hook front housing onto base.
3.Place ice shaving chamber in front
housing and ensure it is seated on the shaft.
4.Twist shaft in direction of arrow to lock into
position.
7.Slide bowl into place on base and
turn clockwise
until it stops at post. This will allow the mix-
ing paddle to
mix ice and ingredients once opera- tion begins.
NOTE: The cup guide on base may be used to shave ice into bowl or cup other than bowl supplied.
8.Turn selector knob to desired set- ting. Slushie setting produces finer ice. Snow Cone setting produces coarser ice.
9.Place ice in ice shaving chamber. Do not fill above top rim of ice shaving chamber.
10.Plug cord into outlet.
11.Place lid on front housing and turn clockwise to lock interlock
switch (Power Start/ Stop). The unit will start and begin to shave ice.
5.Place mixing paddle in bowl.
6.If mixing shaved ice with other ingredients, place ingredients in bowl.
NOTE: Use serving size markings on bowl as a guide for appropriate ice and liquid levels.
NOTE: It may be necessary to open lid occasionally to redistribute ice.
WARNING
Cut Hazard
•Avoid contact with shaving blade.
•Do not use if shaving blade is loose, cracked, bent or damaged.
12.Turn lid counterclockwise to stop. DO NOT shave ice above top ICE line.
13.To remove bowl, turn counter- clockwise, slide out and serve Icy Treat.
4
