840154600 ENv06.qxd 10/26/06 11:37 AM Page 5
How to Clean
1.Unplug unit from electrical outlet.
2.Wash lid, ice shaving chamber, front housing with shaving blade, mixing paddle, and bowl in hot, soapy water. Rinse and dry.
All removable parts may be washed on the top rack of a dishwasher, or if an energy saver mode is used, top or bottom rack.
3.Wipe the base with a damp cloth. Dry with a soft, dry cloth.
Do not use abrasives.
wWARNING
Electrical Shock Hazard
•Disconnect power before cleaning.
•Do not immerse cord, plug or base in any liquid.
Failure to follow these instructions can result in death or electrical shock.
WARNING
Cut Hazard
•Avoid contact with shaving blade.
•Do not use if shaving blade is loose, cracked, bent or damaged.
Troubleshooting
PROBLEM | PROBABLE CAUSE/SOLUTION | |
|
|
|
Ice not shaving. | • | Turn off. Redistribute ice in chamber. |
| • | Is lid completely locked into interlock (power |
|
| Start/Stop) switch? |
| • | Is unit plugged in? |
| • | Is front housing locked into base? |
| • | Is the shaft locked into position? |
| • | Ensure ice shaving chamber is placed in front |
|
| housing AFTER the front housing has been |
|
| locked onto the base. |
|
|
|
Mixing paddle | • | Make sure bowl has been turned clockwise to |
not turning. |
| stop at post on base |
|
|
|
Unit is leaking. | • | Unshaven ice may melt and drip onto base, |
|
| giving the appearance of leakage. Wipe base dry |
|
| with a soft cloth. See “How to Clean.” |
|
|
|
5