Hamilton Beach 840159500 manual Vertical Steam

1 SILK OFF

Press the Temperature Selector to turn the iron back on for another hour

of ironing.

Temperature

Selector

Retractable Cord

1. Pull cord to desired length. Do not unwind cord beyond

colored tape

indicator on cord.

2 POLYESTER

3 RAYON

4 COTTON

5 LINEN

The iron will shut off after 1 hour and the indicator box around OFF in the Fabric Setting indicator will blink on and off.

Features (continued)

Power On Light

The Power On light comes on when the iron is first

plugged in, and

Power will remain on

On until the iron is

Light

unplugged. The light will stay on, even if Fabric Setting Indicator is OFF.

Auto Shutoff

840159500 Ev02.qxd

4/2/07 2:28 PM Page 5

2.To store cord, press and hold the Cord Release Button while

guiding the cord into the storage area.

wWARNING: To reduce the risk of an eye injury, hold the plug while retracting the cord.

Vertical Steam

1.Follow Steps 1 through 3 in “To Steam Iron.”

2.Hang garment in a location that is not susceptible to damage from heat or moisture. Do not hang in front of

wallpaper, window, or mirror.

3.Hold iron about 6 inches away from garment and

press and release the Blast Button to steam out wrinkles. Wait at least 3-5 seconds before pressing Blast Button again.

4.To turn iron off, press Temperature Selector. Set Fabric Setting Indicator to OFF. Unplug iron. The iron may be turned off by pressing the Temperature Selector button for 3 seconds.

5.Empty water from the iron following directions in “Caring for Your Iron.”

NOTICE: Do not allow hot soleplate to touch delicate garments.

5