Maytag MER6555AAB/Q/W manual Timer, Locking the Control Oven Doors, Fault Codes, Changing Temp F/C

Use and Care - MER6555A**

Oven Cooking

When the clock display is canceled, press the Clock pad to	• “OFF” is displayed for 10 seconds whenever
briefly display the time of day.	a pad is touched.

To restore the Clock display:

Press and hold the Upper Oven CANCEL and Clock pads for several seconds. The time of day will reappear in the display.

Timer

The timer can be set from one minute (1:00) up to 11 hours and 59 minutes (11:59).

The timer can be used independently of any other oven activity. It can also be set while another oven function is operating.

The timer does not control the oven.

To set the Timer:

1. Press the Timer pad.

• “0:00” lights in the display.

•“Timer” will flash.

2.Press the More+ or Less- pad until the correct time appears in the display.

•“Timer” will continue to flash.

3. Press Timer pad again or wait four seconds.

•The time begins counting down.

•The last minute of the timer countdown will be displayed as seconds.

4.At the end of the set time, three long beeps will sound.

To cancel the Timer:

1.Press and hold the Timer pad for three seconds.

OR

2.Press the Timer pad and set the time to 0:00.

Locking the Control

and Oven Doors

The touchpads and oven doors can be locked for safety, cleaning, or to prevent unwanted use. They will not function when locked.

If the oven is currently in use, the touchpads and doors cannot be locked.

The current time of day will remain in the display when the controls are locked.

To lock both doors:

Press and hold the Upper Oven CANCEL and Cook & Hold pads for three seconds.

•“Lock” flashes in the display while both oven doors lock. Once complete, “Lock” stops flashing.

To unlock both doors:

Press and hold the Upper Oven CANCEL and Cook & Hold pads for three seconds.

•“Lock” flashes and then disappears from the display.

•“OFF” appears in the display for several seconds while the doors are unlocking.

Note: The touchpads and oven doors cannot be locked if the oven temperature is 400° F or above.

Fault Codes

“Bake” or “Lock” may flash rapidly in the display to alert you if there is an error or a problem. If “Bake” or “Lock” flash in the display, press CANCEL pad. If “Bake” or “Lock” continue to flash, disconnect power to the appliance. Wait a few minutes, and then reconnect power. If the flashing still continues, disconnect power to the appliance and call an authorized servicer.

Adjusting the Sound Level

The factory default setting for sound is medium (MEd), but it can be changed to low (LO) or high (HI). To change the setting:

1.Press and hold More+ and upper oven CANCEL pads for three seconds. A beep will sound and the current sound level (“LO”, “MEd” or “HI”) will appear in the display.

2.Press More+ pad to increase sound level or the Less- pad to decrease sound level.

3.Wait four seconds and the new setting will be accepted.

4.If the More+ or Less- pad is not pressed within 30 sec- onds, the control will return to the existing settings.

Changing Temp °F/°C

The factory default setting for temperature is Fahrenheit. To change the setting:

1.Press and hold the upper oven Bake and CANCEL pads for three seconds. A beep will sound and the current setting (°F or °C) will appear in the display.

2.Press the More+ or Less- pad to change the setting between °F and °C.

3.Wait four seconds and the new setting will be accepted.

4.If the More+ or Less- pad is not pressed within 30 sec- onds, the control will return to the existing settings.

7

B–5 16023416 ©2004 Maytag Services