Maytag MER6775AAB/F/N/Q/S/W Infinite Switch, Convenience Outlet Canadian Models Only, Oven Racks

Disassembly Procedures

!WARNING

To avoid risk of electrical shock, personal injury, or death: disconnect electrical and gas supply before servicing.

Infinite Switch

The infinite switch is a rotary switch, which controls the power dissipated by a heating element. They are located on the control panel.

1.Disconnect power before servicing.

2.Remove infinite switch control knobs located on the backguard.

3.Remove backguard, see "Oven Control/Electronic Clock" procedures. (Perform steps 1 – 4.)

4.Remove screws securing infinite switch to backguard.

5.Label and disconnect wiring and remove infinite switch.

6.Reverse procedures to reassemble.

NOTE: When replacing an infinite switch, ensure the switch is matched to the element.

Lower Oven

•Equipped with two RollerGlide™ racks, or 1 RollerGlide rack and 1 Rollout rack.

To remove oven racks:

•Pull rack straight out until it stops at the lock-stop position; lift up on the front of the rack and pull out.

•For lower oven racks, pull both the rack glide and rack base out together.

To replace oven racks:

•Place rack on the rack support in the oven; tilt the front end up slightly; slide rack back until it clears the lock stop position; lower front and slide back into the oven.

Convenience Outlet

(Canadian Models Only)

The convenience outlet is located on the lower side of the backguard. It is useful for small appliances.

When using the outlet be sure the appliance cord does not rest on or near the surface element. If the surface element is turned on, the cord and outlet will be damaged.

The convenience outlet circuit breaker may trip if the small appliance plugged into it exceeds 10 amps.

1.Disconnect power before servicing.

2.Remove infinite switch control knobs located on the backguard.

3.Remove backguard, see "Oven Control/Electronic Clock" procedures. (Perform steps 1 – 4.)

4.Remove screws securing outlet to backguard.

5.Label and disconnect wiring and remove outlet.

6.Reverse procedures to reassemble.

Oven Racks

• All racks are designed with a lock-stop edge.

Upper Oven

•Equipped with one rack and rack position.

•When pulling the upper oven rack out to remove or check food, grasp the front edge of the rack.

Rack Positions

Rack 4: Use for some two-rack baking.

Rack 3: Use for most baked goods on a cookie sheet or jelly roll pan, layer cakes, frozen pies, and frozen convenience foods.

Rack 2: Use for roasting small cuts of meat, casseroles, baking loaves of bread, bundt cakes or custard pies, and two-rack baking of cakes and cookies.

Rack 1: Use for roasting large cuts of meat and poultry, dessert souffles or angel food cake, and two- rack baking of biscuits.

Multiple Rack Cooking:

Two Rack: Use rack position 1 and 4, 1 and 5 or 2 and 5.

Half Rack Accessory (lower oven only)

A half rack, to increase oven capacity, is available as an accessory. It fits in the left, upper portion of the oven and provides space for a vegetable dish when a large roaster is on the lower rack.

Contact your Maytag dealer for the "HALFRACK" Accessory Kit or call 1-800-688-8408.

©2004 Maytag Services 16023416 27