Hamilton Beach HB-363 owner manual d.Cleaning the Cover outlet filter

1.Separate the pre-motor filter from the mesh cassette. Each filter can be tapped against the side of a trash can to remove the excess dirt and dust.

Note: This filter should be checked and cleaned periodically.

2.Return the pre-motor filter and cassette to the vacuum cleaner. Replace the pre-motor filter cover before restarting the vacuum cleaner.

d.Cleaning the Cover outlet filter

Note: This is located between the rear faux wheels of the vacuum.

1.Release the cover outlet filter and remove the cover as shown. Remove the filter by pulling the tab towards you (Fig. 6/6).

Fig 6/6

2.The filter can be tapped against the side of a trash can to remove the excess dirt and dust.

3.Return the cover outlet filter to the vacuum cleaner. Replace the cover before restarting the vacuum cleaner.

IMPORTANT: The motor of this product has a thermal cut-off to protect the unit from overheating. The safety switch will turn off the unit when the motor overheats, which is usually the result of abnormal use of the unit. The product will resume to normal working conditions once the motor is completely cooled down.

IMPORTANT: Cleaning the filters regularly improves the vacuuming performance. Make sure that all the filters are replaced back into the vacuum cleaner before using. This vacuum cleaner is intended for household use only and not for commercial or industrial use. Store the vacuum in a cool dry area. Any other service should be performed by an authorized service center.

9