MICROLAB® Carousel User Guide (June 2003)
Index bracket platter kit
The carousel comes with an index bracket kit (8488-01 or -02). The index bracket is used during calibration.
To install the index bracket to the carousel housing assembly:
1.Mount the index bracket (8322-01 or -02) to the right side of the carousel housing assembly, using the two screws (8365-01) supplied from the index bracket kit. See figure 6.
2.Mount the index pointer (8383-01 or 8527-01) on to the index bracket, using two screws (8375-01) supplied from the index bracket kit. See figure 6.
Figure 6: 8/10 station carousel index bracket components
