Managing Main Battery Power
Data and files saved on the Dolphin terminal may be stored in RAM memory; therefore, maintain a continuous power supply to the terminal to help prevent data loss. When you remove a battery pack, insert another charged battery pack in the Dolphin. If the main battery pack is low, insert the terminal into a charging peripheral to power the terminal and begin recharging the battery.
Note: If the main battery is low and the terminal is in suspend mode, pressing the SCAN button does not wake the Dolphin terminal; you must replace the discharged battery with a fully charged battery.
Checking Battery Power
Power icons appear in the command bar at the bottom of the window. For example, 
indicates a low battery.
Note: To manually check battery power, also tap Start > Settings > Control Panel > | . |
Storage Guidelines
To maintain optimal battery performance, follow these storage guidelines:
•Avoid storing batteries outside the specified range of
•For prolonged storage, do not keep batteries stored in a charger that is connected to a power source.
Guidelines for Battery Use and Disposal
The following are general guidelines for the safe use and disposal of batteries:
•Use only the battery supplied, recommended, or approved by Hand Held Products.
•Replace defective batteries immediately; using a defective battery could damage the Dolphin terminal.
•Never throw a used battery in the trash. It contains heavy metals and should be recycled according to local guidelines.
•Don’t
•Excessive discharge damages a battery. Recharge the battery when your terminal indicates low battery power.
•Although your battery can be recharged many times, it will eventually be depleted. Replace it after the battery is unable to hold an adequate charge.
•If you are not sure the battery or charger is working properly, please send it to Hand Held Products or an authorized Hand Held Products service center for inspection.
3 - 18 | Rev D | Dolphin® 7600 User’s Guide |
| 10/18/2007 |
|
