Quick Check ImageData

The Quick Check ImageData (QCID) program was designed for use in conjunction with the QC890 Verifier. Use of any other hardware devices with this program is not supported. Installation of the QCID software for your appropriate operating system is included on the CD-ROM that accompanied your verifier.

The QCID is the graphical interface to the Quick Check 890 Verifier. The verification results can be saved for later reference.

Installation of Quick Check ImageData

To install the Quick Check ImageData, insert the CD and follow the instructions that display.

Communication Interfaces

The QC890 Verifier system supports the following interfaces: USB, RS-232, and Bluetooth®.

USB Communication Interface

For the USB interface, the Hand Held Products CDC-ACM driver must be installed prior to using the QC890 Verifier. This driver is copied to the following directory during install:

<install location>\Drivers\USBCOMPortEmulation/hhpcdc.inf

The default <install location> is C:\Program Files\Hand Held Products\Quick Check ImageData\drivers\USBCOMPortEmulation.

Quick Check® 890 User’s Guide

2 - 1

Hand Held Products 890 manual Installation of Quick Check ImageData, Communication Interfaces

Models: 890