Hand Held Products 890 manual USB COM Port Emulation

Note: Please review the file, readme.htm, in the install location prior to running the QCID.

Connect the QC890 Verifier to the host as shown in the illustration below.

1

2

USB COM Port Emulation

Scan the following bar code to program the QC890 Verifier to emulate an RS- 232-based COM Port. After connecting the QC890 Verifier and upon successful installation of the USB driver, the driver will use the next available COM Port. All QC890 Verifiers that have been configured for USB COM Port emulation use this host assigned port number. USB COM Port Emulation is the default interface for the QC890 Verifier.

* USB COM Port Emulation

Note: No additional configuration (e.g., baud rate) is necessary.

2 - 2 Quick Check® 890 User’s Guide