Hanns.G HL195, HSG1145 manual User’s Manual, the OSD. Enter the option and adjust the level, System

User’s Manual

	the OSD. Enter the option and adjust the level.
OSD TIME-OUT	Select 「OSD TIME-OUT」option to set the OSD time out from
	10 to 100 seconds. Enter the option and adjust the level.
	To choose the color combination of the OSD window, select
OSD COLOR	「OSD COLOR」option under 「OSD SETTING」menu, choose
	modes 1/2/3.
SYSTEM
	While transferring via the HDMI port, it is recommended to set
	AUDIO INPUT to HDMI; if no sound is outputted, it is
AUDIO INPUT	recommended to select AUDIO INPUT as PC, and make sure the
	PC audio output cable is connected to monitor’s LINE IN (or
	AUDIO IN) port. [For HDMI Input only]
	Select the 「VOLUME」option to change the volume level. Enter
VOLUME	the option and adjust the level. [This function applies only to
	models with incorporated audio.]
	● By high volume, risk of hearing damage exists.

MUTE

DDC/CI

FACTORY RESET

INFORMATION

Select the「MUTE」option to switch the function On or Off. [The availability of this function depends upon the selected model. Adjusting the volume while muted cancels Mute mode.]

Select the 「DDC/CI」option to switch the function On or Off. [Dual input mode optional]

Select the 「FACTORY RESET」option to reset to the monitor’s default setting. This will erase the current settings. Enter the option and select On or Off.

Display Horizontal frequency/Vertical frequency/Resolution information.

18