Hanns.G HP222, HSG 1095 manual User’s Manual, System

Models: HSG 1095 HP222

1 25
Download 25 pages 32.33 Kb
Page 19
Image 19
SYSTEM

User’s Manual

OSD TIME-OUT

OSD COLOR

SYSTEM

AUDIO INPUT

VOLUME

MUTE

DDC/CI

FACTORY RESET

INFORMATION

the OSD. Enter the option and adjust the level.

Select OSD TIME-OUToption to set the OSD time out from 10 to 100 seconds. Enter the option and adjust the level.

To choose the color combination of the OSD window, select

OSD COLORoption under OSD SETTINGmenu, choose modes 1/2/3.

While transferring via the HDMI port, it is recommended to set AUDIO INPUT to HDMI; if no sound is outputted, it is recommended to select AUDIO INPUT as PC, and make sure the PC audio output cable is connected to monitor’s LINE IN (or AUDIO IN) port. [For HDMI Input only]

Select the VOLUMEoption to change the volume level. Enter the option and adjust the level. [This function applies only to models with incorporated audio.]

By high volume, risk of hearing damage exists.

Select theMUTEoption to switch the function On or Off. [The availability of this function depends upon the selected model. Adjusting the volume while muted cancels Mute mode.]

Select the DDC/CIoption to switch the function On or Off. [Dual input mode optional]

Select the FACTORY RESEToption to reset to the monitor’s default setting. This will erase the current settings. Enter the option and select On or Off.

Display Horizontal frequency/Vertical frequency/Resolution information.

19

Page 19
Image 19
Hanns.G HP222, HSG 1095 manual User’s Manual, System