GAS POWERED POLESAW/PRUNER 1 HP
ASSEMBLY AND OPERATING INSTRUCTIONS
Your Warranty Is Voided If
Model
SAVE THIS MANUAL
PRODUCT SPECIFICATIONS
GENERAL SAFETY RULES AND PRECAUTIONS
WORK AREA
sparks which may ignite the dust or fumes
PERSONAL SAFETY
TOOL USE AND CARE
For technical questions, please call
1. IMPORTANT! Your Warranty is voided if
SPECIFIC SAFETY RULES AND PRECAUTIONS
SERVICE
SKU 95283 For technical questions, please call 1-800-444-3353 PAGE
12. Do not use the Polesaw/Pruner if the Chain is dull
KICKBACK PRECAUTIONS
9. Always maintain a firm grip on the Polesaw/Pruner with both hands
SKU 95283 For technical questions, please call 1-800-444-3353 PAGE
FIRE AND EXPLOSION PRECAUTIONS
ELECTRICAL PRECAUTIONS
CARBON MONIXIDE PRECAUTIONS
2. Keep the Polesaw/Pruner and surrounding areas clean at all times
NOISE PRECAUTIONS
MECHANICAL PRECAUTIONS
CHEMICAL PRECAUTIONS
8. Use only Engine manufacturer recommended fuel and oil
UNPACKING
MISC. PRECAUTIONS
ASSEMBLY INSTRUCTIONS
FIGURE A
FIGURE B
PRODUCT FEATURES
See Figure B
For technical questions, please call
See Figure B
5. Bottom Pipe Support 2 Always hold the Polesaw/Pruner firmly with both hands. Keep your left hand on the front portion of the Bottom Pipe Support and your right hand on the rear portion of the Bottom Pipe Support, so that your body is to the left of the chain line. Never use a left-handed cross-handed grip or any stance which would place your body or arm across the chain line
See Figure B
See Figure B
See Figure B
PRE-START INSTRUCTIONS
To Fill The Chain Oil Tank
See Figure B
To Fill The Fuel Tank
1. IMPORTANT! Your warranty is voided if
OPERATING INSTRUCTIONS
To Start The Polesaw/Pruner
See Figure B
To Stop The Polesaw/Pruner
To Operate The Polesaw/Pruner
See Figure B
FIGURE D
3. DO NOT use a back and forth sawing type motion for cutting
For technical questions, please call
INSPECTION, MAINTENANCE, AND CLEANING
SKU 95283 For technical questions, please call 1-800-444-3353 PAGE
FIGURE C
the Drive Gear 44 and into the Guard Bar groove. The cutters on the top of the Guard Bar should face toward the Guard Bar tip, in the direction of the chain rotation. Replace the Chain Saw Cover and secure with the Nut. Tighten the Nut finger tight only to allow for tension adjustment
SKU 95283 For technical questions, please call 1-800-444-3353 PAGE
Problem
TROUBLESHOOTING
PLEASE READ THE FOLLOWING CAREFULLY
Possible Solution
PAGE
PARTS LIST - POLESAW/PRUNER UNIT
For technical questions, please call
Description
For technical questions, please call
ASSEMBLY DIAGRAM - POLESAW/PRUNER UNIT
and are not available individually as replacement parts
PAGE
PAGE
PARTS LIST - ENGINE
For technical questions, please call
Description
For technical questions, please call
ASSEMBLY DIAGRAM -ENGINE
as replacement parts
PAGE
Manufacturer’s Warranty Coverage
Emission Control System Warranty
United States Emission Control Defects Warranty Statement
Harbor Freight Tools Emission Control Defects Warranty Coverage
LIMITED 90 DAY/1 YEAR WARRANTY
Emission Control System Warranty - continued
WARRANTY
For technical questions, please call