TROUBLESHOOTING
|
|
|
|
|
Problem |
| Possible Cause |
| Possible Solution |
Guard Bar and Chain running hot and | 1. | Chain tension too tight. | 1. | |
smoking. |
|
|
| lesson tension on Chain. |
| 2. | Chain Oil Tank empty. | 2. | Refill Chain Oil Tank. |
Engine runs, but Chain is not rotating. | 1. | Chain tension too tight. | 1. | |
|
|
|
| lesson tension on Chain. |
| 2. | Damaged Guard Bar and/or | 2. | Have a qualified service technician repair or |
|
| Chain. |
| replace Guard Bar and/or Chain. |
Chain rotates while Engine is at idle. | 1. | Engine idle speed set too | 1. | Have a qualified service technician reset |
|
| high. |
| Carburetor idle adjustment Screw to lower |
|
|
|
| idle (RPM) speed. |
Power Switch does not turn off | 1. | Defective Power Switch. | 1. | Immediately remove Spark Plug Cap from Spark |
Engine. |
|
|
| Plug to stop Engine. Discontinue using Polesaw/ |
|
|
|
| Pruner until the tool is repaired by a qualified |
|
|
|
| service technician. |
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISKS AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
SKU 95283 | For technical questions, please call | PAGE 17 |
