Your Warranty Is Voided If
ASSEMBLY AND OPERATING INSTRUCTIONS
GAS POWERED POLESAW/PRUNER 1 HP
Model
GENERAL SAFETY RULES AND PRECAUTIONS
PRODUCT SPECIFICATIONS
SAVE THIS MANUAL
WORK AREA
TOOL USE AND CARE
PERSONAL SAFETY
sparks which may ignite the dust or fumes
For technical questions, please call
SERVICE
SPECIFIC SAFETY RULES AND PRECAUTIONS
1. IMPORTANT! Your Warranty is voided if
SKU 95283 For technical questions, please call 1-800-444-3353 PAGE
9. Always maintain a firm grip on the Polesaw/Pruner with both hands
KICKBACK PRECAUTIONS
12. Do not use the Polesaw/Pruner if the Chain is dull
SKU 95283 For technical questions, please call 1-800-444-3353 PAGE
CARBON MONIXIDE PRECAUTIONS
ELECTRICAL PRECAUTIONS
FIRE AND EXPLOSION PRECAUTIONS
2. Keep the Polesaw/Pruner and surrounding areas clean at all times
CHEMICAL PRECAUTIONS
MECHANICAL PRECAUTIONS
NOISE PRECAUTIONS
8. Use only Engine manufacturer recommended fuel and oil
ASSEMBLY INSTRUCTIONS
MISC. PRECAUTIONS
UNPACKING
FIGURE A
See Figure B
PRODUCT FEATURES
FIGURE B
For technical questions, please call
See Figure B
5. Bottom Pipe Support 2 Always hold the Polesaw/Pruner firmly with both hands. Keep your left hand on the front portion of the Bottom Pipe Support and your right hand on the rear portion of the Bottom Pipe Support, so that your body is to the left of the chain line. Never use a left-handed cross-handed grip or any stance which would place your body or arm across the chain line
See Figure B
See Figure B
To Fill The Chain Oil Tank
PRE-START INSTRUCTIONS
See Figure B
See Figure B
OPERATING INSTRUCTIONS
1. IMPORTANT! Your warranty is voided if
To Fill The Fuel Tank
To Start The Polesaw/Pruner
To Operate The Polesaw/Pruner
To Stop The Polesaw/Pruner
See Figure B
See Figure B
FIGURE D
3. DO NOT use a back and forth sawing type motion for cutting
For technical questions, please call
SKU 95283 For technical questions, please call 1-800-444-3353 PAGE
INSPECTION, MAINTENANCE, AND CLEANING
FIGURE C
the Drive Gear 44 and into the Guard Bar groove. The cutters on the top of the Guard Bar should face toward the Guard Bar tip, in the direction of the chain rotation. Replace the Chain Saw Cover and secure with the Nut. Tighten the Nut finger tight only to allow for tension adjustment
SKU 95283 For technical questions, please call 1-800-444-3353 PAGE
PLEASE READ THE FOLLOWING CAREFULLY
TROUBLESHOOTING
Problem
Possible Solution
For technical questions, please call
PARTS LIST - POLESAW/PRUNER UNIT
PAGE
Description
and are not available individually as replacement parts
ASSEMBLY DIAGRAM - POLESAW/PRUNER UNIT
For technical questions, please call
PAGE
For technical questions, please call
PARTS LIST - ENGINE
PAGE
Description
as replacement parts
ASSEMBLY DIAGRAM -ENGINE
For technical questions, please call
PAGE
United States Emission Control Defects Warranty Statement
Emission Control System Warranty
Manufacturer’s Warranty Coverage
Harbor Freight Tools Emission Control Defects Warranty Coverage
WARRANTY
Emission Control System Warranty - continued
LIMITED 90 DAY/1 YEAR WARRANTY
For technical questions, please call