around the Polesaw/Pruner when it is running.
MISC. PRECAUTIONS
1.
DANGER! We recommend that people with pacemakers not use this tool. This tool produces strong electromagnetic fields that can cause interference to or failure of the pacemaker. People with pacemakers should consult their physician(s) for advice.
2.
WARNING! The warnings and precautions discussed in this manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts Lists on pages 18 and 20 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
ASSEMBLY INSTRUCTIONS
1.Insert the Gear Box (61) onto the upper section of the Top Pipe Support (33). Then secure the Gear Box to the Top Pipe Support using one short Screw (59), one Washer (60), one long Screw (58), one Spring Washer (57), and one Washer (56). (See Figure A.)
2.Insert the lower section of the Top Pipe Support (33) into the Connector (22). Then secure the Top Pipe Support to the Connector by firmly tightening the Wing Nut (31). (See Figure A.)
GEAR BOX (61)
SCREW (59), WASHER (60)
SCREW (58), SPRING WASHER (57), WASHER (56)
TOP PIPE SUPPORT (33)
FIGURE A
WING NUT (31)
SKU 95283 For technical questions, please call
