5.Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.
6.Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool.
SERVICE
1.Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury.
2.When servicing a tool, use only identical replacement parts. Follow instructions in the “Inspection, Maintenance, And Cleaning” section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury.
SPECIFIC SAFETY RULES AND PRECAUTIONS
1.
IMPORTANT! Your Warranty is voided if:
You do not operate the Polesaw/Pruner with the proper 50:1 fuel mix in its fuel tank. Never run the Engine with an improper fuel mix, low or no fuel mix. Running the Engine with an improper fuel mix, low or no fuel mix, will permanently damage the unit.
2.Maintain labels and nameplates on the Polesaw/Pruner. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
3.
WARNING! Always wear safety equipment. When operating the Polesaw/Pruner, always wear ANSI approved safety impact eye goggles, hearing protection, heavy duty work gloves, sturdy work boots, and head protection.
4.Never leave the Polesaw/Pruner unattended when it is running. Turn off the Engine before leaving.
5.Never allow children in the work area with the danger of falling debris and a power tool in operation.
