Manuals / Chicago Electric / Lawn and Garden / Pole Saw

Chicago Electric 95283 warranty Operating Instructions, To Fill The Fuel Tank

Models: 95283

1 23
Download 23 pages 53.3 Kb
Page 12
Image 12

2.Remove the Chain Oil Tank Cap (67) and carefully fill the Chain Oil Tank (69). Then, replace the Chain Oil Tank Cap and tighten securely. (See Figure B.)

3.NOTE: Do not use dirty, used, or otherwise contaminated oil. Damage may occur to the Oil Pump (47), Guard Bar (73), or Saw Chain (74). (See Figure B.)

To Fill The Fuel Tank:

1.IMPORTANT! Your warranty is voided if:

You do not operate the Polesaw/Pruner with the proper 50:1 fuel mix in its Fuel Tank (78A). Never run the Engine (1) with an improper fuel mix, low or no fuel mix. Running the Engine with an improper fuel mix, low or no fuel mix will permanently damage the unit. (See Figure B.)

2.To obtain the proper 50:1 fuel mix, combine 50 parts unleaded gasoline with 1 part 2-cycle oil in a clean, approved container. Cover and shake to thoroughly mix before each fueling. NOTE: Mix only enough fuel for a few days work. The maximum storage time of mixed fuel is three months.

3.Once the proper fuel mix is obtained, remove the Fuel Cap (74A). Fill the Fuel Tank (78A) approximately 3/4 full with the fuel mix (the Fuel Tank capacity is 0.2 gallon). Then, replace the Fuel Cap. (See Figure B.)

4. WARNING! NEVER attempt to fill the Fuel Tank (78A) when the Engine (1) is running or hot to the touch.

OPERATING INSTRUCTIONS

To Start The Polesaw/Pruner:

1.WARNING! Always wear safety equipment. When operating the Polesaw/ Pruner, always wear ANSI approved safety impact eye goggles, hearing protection, heavy duty work gloves, sturdy work boots, and head protection.

2.Check to make sure the Power Switch (10) is in its “OFF” position.

(See Figure B.)

3.Remove the Guard Bar Cover (78) from the unit. Place the Polesaw/Pruner on a flat, level, ground surface, making sure the Saw Chain (74) does not come in contact with any objects on the ground. (See Figure B.)

4.Set the Choke Lever (48A) to the appropriate position:

A.“START” if the Engine (1) is cold. (See Figure B.)

B.“RUN” if the Engine (1) is warm. (See Figure B.)

SKU 95283 For technical questions, please call 1-800-444-3353 PAGE 12

Page 11 Page 13
Page 12
Image 12
Chicago Electric 95283 warranty Operating Instructions, To Fill The Fuel Tank
Page 11 Page 13

95283 specifications

The Chicago Electric 95283 is a versatile and robust tool that has gained a reputation for its performance and reliability among DIY enthusiasts and professional tradespeople alike. This compact bench top band saw is designed to handle a variety of cutting tasks, making it a valuable addition to any workshop or home garage.

One of the standout features of the Chicago Electric 95283 is its powerful motor. Equipped with a 1.5 horsepower motor, this band saw delivers strong cutting performance, allowing users to effortlessly cut through various materials including wood, plastic, and even soft metals. The motor operates quietly, which enhances the user experience during long cutting sessions.

In terms of design, the Chicago Electric 95283 boasts a sturdy, all-steel construction that ensures durability and stability. The frame is designed to minimize vibrations, which enhances precision during operation. The saw table is spacious and can be adjusted to an angle for accurate bevel cuts, allowing users to perform more complex cutting tasks with ease.

The band saw features a user-friendly blade tracking adjustment knob, which helps maintain the tension and alignment of the blade. This tool is compatible with a variety of blade widths, enabling users to choose the best blade for their specific cutting needs. The saw also includes a blade guard, ensuring user safety while operating the tool.

Another significant characteristic of the Chicago Electric 95283 is its portability. Despite its robust construction, the band saw is relatively lightweight, making it easy to move around the workshop or take on job sites. This feature is particularly beneficial for contractors who require mobility without compromising on power.

In summary, the Chicago Electric 95283 stands out for its combination of power, precision, and portability. Whether tackling woodworking projects or metalworking tasks, this versatile band saw offers the performance needed to achieve professional-quality results. Its durable construction, user-friendly features, and adjustable capabilities make it an excellent choice for both novices and experienced craftsmen. As the DIY community continues to grow, tools like the Chicago Electric 95283 will play a crucial role in empowering individuals to bring their creative visions to life.