HANNspree 1506-060B000 manual Adjusting Setup Settings, Enter the Setup menu

English

3.6Adjusting Setup Settings

1 Press MENU to enter the OSD Main				Picture		Setup Wizard
	Menu screen.					OSD Language
2	Press	/	on the remote control or	Audio		OSD Time
				Channel		Clock Set
						Clock Mode
	CHS / CHT on the control panel to select			V-CHIP		Time Zone
	Setup menu.					Sleep Time
3	Press	/ OK on the remote control or		Setup		Back Light
						CC Mode
	INPUT/ VOL+ on the control panel to					Next Page
					Move	OK Enter	Return Return	Menu Exit
	enter the Setup menu.

4Press / on the remote control or CHS / CHT on the control panel to select an item.

5Press / OK on the remote control or INPUT/ VOL+ on the control panel to enter the item.

6Press / on the remote control or VOL+/ VOL- on the control panel to change the scales or press OK on the remote control or INPUT/ VOL+ on the control panel to mark an item.

7Press RETURN to return to the Setup menu.

8Press MENU/ VOL- to exit the Setup menu.

9The Setup menu can be used to adjust the Setup Wizard, OSD Language, OSD TIme, Clock Mode, Clock Set, Time Zone, Sleep Time, Back Light, CC Mode, Analog CC, and CC Style settings. Clock Set is only available for adjustments when Clock Mode is set to Manual; Clock Mode can be set to Auto or Manual.

•Setup Wizard can be used to set up OSD Language, Clock Mode, Time Zone, TV RF Source, and channel scan.

•The five available OSD languages are: English, Spanish, French, Traditional Chinese, and Simplified Chinese.

•OSD Time can be set to 10 secs, 20 secs, 30 secs, and 60 secs.

•The Time Zone can be set to Eastern, Central, Mountain, Pacific, Alaska, and

Hawaii.

•The Sleep Time can be set to Sleep Off, 15 mins, 30 mins, 45 mins, 60 mins, 90 mins, and 120 mins.

•Press / on the remote control to move the scale in the Back Light settings.

•To change settings in CC Mode, Analog CC, Digital CC, and CC Style, press /

on the remote control to select the items and press / OK to activate the item.

Note:

The items available on the OSD may vary depending on the input signal source.

32