2.3Using the TV
2.3.1Turning the TV On and Off
1Press 
on the control panel or remote control. The power LED indicator on the TV changes from red to green, indicating that the TV is on.
2Press 
again. The power LED changes from green to red, indicating that the TV is off.
2.3.2Switching Source Signals
Press INPUT on the control panel or remote control to select the incoming source signal to set TV source for channel search. Press OK to confirm.
2.3.3Performing an Automatic Channel Search
Before using the TV to view programs, you need to activate the channel search first.
1Press MENU on the control panel or remote control, then select to enter the Channel menu.
2Select Antenna to set the signal source. (Air or Cable, default is Air)
3Select Auto scan, then Start option.
4Press OK on the remote control to run the channel search.
2.3.4Selecting Channels
•Press CHS on the control panel or CH on the remote control to increase the channel number.
•Press CHT on the control panel or CH on the remote control to decrease the channel number.
•Enter the specific channel number by pressing the number buttons on the remote control.
2.3.5Adjusting the Volume
1Press VOL+ on the control panel or VOL on the remote control to increase the volume.
2Press VOL- on the control panel or VOL on the remote control to decrease the volume.
English
25
