HANNspree 1506-060B000 manual OSD Setting Menus, Adjusting Picture Settings

English

3.1OSD Setting Menus

Follow the instructions indicated on the bottom of the OSD Function Menu. Press CH / CH on the control panel or / arrow keys on the remote control to scroll through the menus. press INPUT/ VOL+ on the control panel or OK key on the remote control to select an item and then press MENU/ VOL- key to exit the OSD menu. The following menus can be set by different adjustment methods.

3.2Adjusting Picture Settings

1	Press MENU to enter the OSD Main Menu			Picture	Picture Mode
	screen.				Brightness
2	Press	/	on the remote control or	Audio	Contrast
				Channel	Sharpness
	CHS / CHT on the control panel to select				Tint
	Picture menu.				Color
				V-CHIP	Digital NR
3	Press	/ OK on the remote control or		Setup	X-Contrast
					Aspect Ratio
	INPUT/ VOL+ on the control panel to				Next Page
	enter the Picture menu.			Move	OK Enter	Return Return	Menu Exit

4Press / on the remote control or CHS / CHT on the control panel to select an item.

5Press / OK on the remote control or INPUT/ VOL+ on the control panel to enter the item.

6Press / on the remote control or VOL+/ VOL- on the control panel, to change the scales or press OK on the remote control or INPUT/ VOL+ on the control panel to mark an item.

7Press RETURN to return to the Picture menu.

8Press MENU/ VOL- to exit the Picture menu.

9The Picture menu can be used to adjust the Picture mode, Brightness, Contrast, Sharpness, Color, Tint, Digital NR, X-Contrast, Aspect Ratio, Color Temp and Recall settings. Brightness, Contrast, Sharpness, Color, and Tint are only

available for adjustments if you select User in Picture Mode. Press / on the remote control or VOL+/ VOL- on the control panel to adjust these settings.

•The Picture Mode can be set to Vivid, Standard, Movie, or User.

•The Digital NR can be set to Off, Weak, Medium, or Strong.

•The X-Contrast can be set to Off or On.

•The Aspect Ratio can be set to Full, Normal, Zoom, Subtitle, Auto, Zoom-1, Wide.

•The Color Temp can be set to Warm, Standard, or Cool.

•The Recall can be used to reset the original factory settings.

Note:

The items available on the OSD may vary depending on the input signal source.

28