![](/images/new-backgrounds/1278093/27809375x1.webp)
6.During the setting process, only digit keys ‘0’ through ‘9’ are valid inputs, while other buttons are deemed invalid and do not affect the code setting. For example, inputting “02” then pressing RETURN does affect the “02” already input.
6.1.3Searching Codes
If the desired electronic equipment code for setting can not be found on the list in the appendix, try to use the
1.Press the corresponding electronic equipment button. The indicator light will come on for 2 seconds then it goes off; after 3 seconds, the indicator light will come on again, showing that the setting mode has been entered.
2.Hold the electronic equipment button while pressing POWER, then input mode
codes
3.If setting is successful, the electronic equipment
4.During search, the indicator light will flash when the POWER signal of each electronic equipment is transmitted. When one cycle of
5.Pressing CH+/CH- during search transmits the next/previous electronic equipment POWER signal without waiting for 5 seconds, and resets the timer to trigger another
5seconds interval.
6.Pressing POWER during search exits search mode without saving the new electronic equipment code; pressing OK during search saves the most recently searched electronic equipment code and then exits search mode.
7.Buttons other than POWER, OK, and CH+/CH- are not functional during search.
6.1.4Setting Volume Lock
Operating procedures are as follows:
English
37