Toshiba IK-WB02A Setting up a format to display date/time, Setting the color of date/time display

Installation/Set up

and OperationViewing • Listening

Recording

Setting up

Others

System Settings (Cont.)

●Setting up a format to display date/time

1)Select the “Date-Time Displaying Format” from the pull-down menu.

•yyyy-mm-dd HH:MM:SS (ex. 2004-9-15 14:23:32)

•dd Mmm yyyy HH:MM:SS (ex. 15 Sep 2004 14:23:32)

•mm-dd-yyyy HH:MM:SS (ex. 9-15-2004 14:23:32) (default: dd Mmm yyyy HH:MM:SS)

2)Click the “Change” button.

●Setting the color of date/time display

1)Select “Text Color” from the pull-down menu. red/green/blue/white/black (default: green)

2)Click the “Change” button.

●Changing the time using an NTP server setting

1)Mark “NTP” (default: not marked).

2)Enter the host name of NTP server in the “NTP Server” field.

3)Set the “Adjusting Cycle” from the pull-down menu (to specify the intervals to adjust time) (default: 24 hours).

4)Click the “Adjust” button.

●Adjusting the date and time

1)Unmark “Synchronize with PC’s Time.”

2)Enter the value in “Date” with numbers and “/” (e.g. 20/9/2004).

3)Enter the value in “Time” with numbers and “:” (e.g. 14:23:32).

4)Click the “Adjust” button.

•When “Synchronize with PC’s Time” is marked, you can synchronize the setting with the time on a personal computer (default: marked).

●Setting the time zone

1)Select “Time Zone” from the pull-down menu.

2)Click the “Adjust” button.

●Daylight Saving setting

1)Select “ON” or “OFF” for the “Daylight Saving” setting (default: OFF).

2)Click the “Adjust” button.

■Restoring the default settings

You can restore the default settings (initial state).

1)Click “Restore factory default configuration.”

A confirmation message appears, asking whether or not the current settings should be restored to the default configuration.

2)Click “OK.”

58