●Configuring the HTTP port number
1)Enter the HTTP port number in “HTTP Port Number” (default: 80).
•For most applications, select 80 (default: 80).
2)Click the “Change” button.
Important
●If you do not know the subnet mask, consult the provider or relevant network system administration support center.
●You do not need to enter the default gateway if the network camera will not be accessed from another network. If you do need to enter a default gateway, consult your network system administration support center.
●When you try to reconnect to the network camera, be sure to confirm that the entered IP address and HTTP port number are new ones if you changed the IP address and HTTP port number.
Installation/Set up
and OperationViewing • Listening
Recording
Setting up
Others
67
