■Rebooting the network camera
You can restart the network camera.
1)Click “Reboot IP Camera.”
A confirmation message appears, asking whether or not the camera should be rebooted.
2)Click “OK.”
■Updating the Firmware
You can update the firmware on the network camera.
Click “Firmware update.”
For details, refer to “Updating the Firmware” ( page. 75).
■Click “Firmware update.”
You can save the network camera settings on a personal computer. Click “Export current configurations.”
For details, refer to “Saving the Settings on a Personal Computer” ( page. 77). When updating the firmware, the settings are reset. Make sure to save the settings of the camera on your personal computer before starting update operation.
■Importing the Settings Saved on a Personal Computer
You can import the settings saved on a personal computer to the network camera. Click “Import new configurations.”
For details, refer to “Saving the Settings on a Personal Computer” ( page. 77).
Installation/Set up
and OperationViewing • Listening
Recording
Setting up
Others
59