Installation/Set up
and OperationViewing • Listening
Recording
Setting up
Others
Before Calling Service Personnel... (Cont.)
Symptom | Cause | How to Manage |
|
|
|
Cannot perform | ●Lost the power of the | ●Make sure that the power of the network camera is ON. |
settings. | camera during the |
|
| performance. |
|
|
|
|
| ●LAN cable of the camera | ●Make sure that the LAN cable is connected to a hub or |
| has been pulled off | router in the right way. |
| during the performance. |
|
|
|
|
| ●LAN cable of the PC has | ●Make sure that the LAN cable is connected to a hub or |
| been pulled off during the | router in the right way. |
| performance. |
|
|
|
|
| ●Lost the power of a hub | ●Make sure that the power of a hub or router is ON. |
| or router during the |
|
| performance. |
|
|
|
|
| ●IP address in | ●If you change the IP address, you cannot keep your |
| “Connection Settings” in | settings in the setting screen with your old IP address. |
| “Network Settings” has | Search your camera with the application, Camera |
| been changed. | Finder, and try administrator login procedure again. |
|
| ●When you enter IP address of the camera directly to |
|
| the browser, enter the new IP address in URL like |
|
| example below, and try login procedure again. |
|
| http://192.168.0.40/ |
|
|
|
90
