Installation/Set up
and OperationViewing • Listening
Recording
Setting up
Others
Adjusting a Lens
Adjusting the Back Focus
The back focus is set by default at the time of shipment. You may have to
Loosen the focus lock screw with the lens |
| |
properly installed and then turn the back |
| |
focus ring on top of the camera with the | LOCK | |
FOCUS | ||
monitor until the subject distance comes into | ||
| ||
a proper distance scale. After the |
| |
adjustment, fasten the focus lock screw. |
|
Focus ring
Adjusting the Iris
■Auto Iris Lens
The camera is designed for two types of lens (iris lenses without EE Amp (DC) and with
Iris Connector
1) Connect the iris connector of |
|
the auto iris lens to the iris |
|
jack (4P) on the left side of the |
|
camera. |
|
| Auto Iris Lens |
2) Set the iris switch on the right |
|
side of the camera (Default: | IRIS Switch |
IRIS LEVEL | |
DC). |
|
For a DC lens, adjust the iris level on the right side of the camera to ensure correct exposure.
For an EE (VIDEO) lens, adjust the iris level on the lens.
| EE (VIDEO) |
| DC |
| |
| lens |
| lens |
| |
Iris jack | 1. | +12V | 1. |
| |
2. NC | 2. | Damp+(γ) |
| ||
| 3. | VIDEO | 3. | Driver+(wh) |
|
| 4. | GND | 4. |
| |
Iris switch |
| VIDEO |
| DC | Lens side |
|
|
|
|
|
|
10