Connecting the Camera and Personal Computer by Network
■About the IP Address
To connect to the network, the administrator needs to set the network camera IP address.
There are two options to set the IP address.
•Obtaining an IP address automatically from the DHCP server
•Entering an IP address manually
●Obtaining an IP address automatically from the DHCP server
The default setting is “Automatically by DHCP” to obtain an IP address automatically from the DHCP server.
If your network is using DHCP server, keep the setting as “Automatically by DHCP”.
●Entering an IP Address Manually
•Enter an IP address manually if you are not using or do not want to use the DHCP server.
•If you use the DHCP server, the IP address of the network camera may be modified when necessary. Therefore, the previous IP address may no longer be valid, not allowing you to access to the camera. To access to the network camera every time, you need to set a fixed IP address (by manually setting) in the network camera. Also read carefully the operating instructions of the network system devices (routers, hubs, modems, etc.).
•To learn about the procedure for entering an IP address manually, refer to “Configuring the Network Manually” (➝ page.22).
Installation/Set up
and OperationViewing • Listening
Recording
Setting up
Others
13
