Installation/Set up
and OperationViewing • Listening
Recording
Setting up
Others
Before Calling Service Personnel...
Symptom | Cause | How to Manage |
|
|
|
There is no IP | ●The power of the camera | ●Turn on the power. |
address of your | is not turned on. |
|
network camera |
|
|
|
| |
on The Camera | ●LAN cable is not | ●Connect the LAN cable of the camera to a hub or |
Finder’s Network | connected. | router in the right way. |
Camera List. |
| ●Be sure to turn on the power of the hub and router. |
|
|
|
| ●LAN cable is not | ●Connect the LAN cable to the PC in the right way. |
| connected to the PC. |
|
|
|
|
| ●IP address of the PC is | ●Configure the IP address of your PC correctly. |
| not configured. | (→ page 15). |
|
|
|
Cannot display a | ●Installed directory of | ●Assign the directory where you are going to install the |
browser from | browser is wrong. | browser. Start Camera Finder and go to “View”/ |
Camera Finder. |
| “Customize”/“Default Browser.” |
|
|
|
The message, | ●The IP addresses of the | ●Set the correct IP address of the network camera. |
“The page | camera and your PC are | ●Set the correct IP address of your PC. |
cannot be | wrong. |
|
displayed,” |
|
|
|
| |
shows up, and | ●Proxy has set to the | ●When proxy is set to the browser, sometimes you may |
cannot login to | browser. | not able to login. Change the setting which will not via |
the camera even |
| the IP address of the network camera from the proxy of |
if you start |
| the browser, or the setting of host name which will not |
Camera Finder. |
| via proxy. |
|
|
|
Cannot login to | See “The message, ‘The page cannot be displayed,’ shows up, and cannot login to the | |
the camera even | camera even if you start Camera Finder.” | |
though entering |
|
|
the IP address of |
|
|
the camera |
|
|
directly to the |
|
|
browser, and |
|
|
“The page |
|
|
cannot be |
|
|
displayed” shows |
|
|
up. |
|
|
|
|
|
88
