Names and Features of Parts
●Front
Image Pickup
Image sensors are embedded. Protect the part from dust, dirt and finger marks.
●Top
Focus ring
Adjust the back focus of a lens.
Focus Lock Screw
After adjusting the back focus, tighten the screw.
| Reset Button | |
| When the button is | |
| pressed, all the set | |
LOCK | values of the firmware | |
on the network camera | ||
| ||
FOCUS | are reset to the default | |
(➝ page. 93) | ||
| settings (initial state). |
Lens Mount | Tripod Screw Hole |
Install a CS mount lens.
Installation/Setup | |
andOperation | Viewing•Listening |
Recording |
|
●Rear
Alarm Terminal
Connect an external alarm device with the terminal.
SD Card Slot
Insert an SD memory card.
Video-Out Jack
Connect a video monitor to the video output jack.
Setting up
Audio-In Jack
Connect a microphone to the audio input jack.
AC24V/DC12V Power Plug Terminal
Connect an AC24V or DC12V power plug to the terminal.
Audio-Out Jack
Connect an audio output device such as a speaker with a
Ethernet Port
Connect a LAN cable to the port.
A PoE compatible hub is also supported.
Others
5
