Cisco Systems manual Configuring SPA9000 Features

C H A P T E R 4

Configuring SPA9000 Features

This chapter describes how to perform the basic configuration for enabling the SPA9000 features. It also provides detailed explanations of how the system performs each operation, and the parameters controlling system behavior. This chapter includes the following sections:

•Using the Wizard to Configure SPA9000 Voice Features, page 4-1

•Using Dial Plans, page 4-9

•Basic Call Management, page 4-13

•Managing Call Forwarding, page 4-17

•Managing Call Pickup, page 4-25

•Multicast and Group Paging, page 4-27

•Music On Hold, page 4-28

•Enhancements in Release 5.1, page 4-32

Using the Wizard to Configure SPA9000 Voice Features

You can use the SPA9000 Setup Wizard to enable or configure many of the main voice features. This section, which describes the options available, includes the following topics:

•Configuring Client Stations, page 4-2

•Configuring Client Extensions, page 4-4

•Configuring Shared Extensions, page 4-5

•Configuring a Call Hunt Group, page 4-6

•Using the Wizard for Localization, page 4-7

For information about configuring the Auto-Attendant, refer to Chapter 5, “Configuring the LVS Auto-Attendant.”

Note If you use the Setup Wizard after using the administration web server to change the SPA9000 configuration, you may lose any changes to the factory default configuration that were made using the administration server web pages.

	Linksys SPA9000 Administrator Guide
Document Version 3.01		4-1