Chapter 6 SPA9000 Field Reference
Line 1/2/3/4 Tab
Field
Dial Plan
Description
Dial plan script for this line. The default is (<9:>xx.)
The dial plan syntax is expanded in the SPA3102 to allow the designation of three parameters to be used with a specific gateway:
•uid – the authentication
•pwd – the authentication password
•nat – if this parameter is present, use NAT mapping Each parameter is separated by a
Furthermore, it recognizes gw0, gw1, …, gw4 as the locally configured gateways, where gw0 represents the local PSTN gateway in the same SPA3102 unit.
Example 1:
*1xxxxxxxxxx<:@fwdnat.pulver.com:5082;uid=jsmith;pwd=xyz
Example 2:
*1xxxxxxxxxx<:@fwd.pulver.com;nat;uid=jsmith;pwd=xyz
Example 3:
[39]11<:@gw0>
NAT Settings
Field | Description |
|
|
NAT Mapping Enable | To use externally mapped IP addresses and SIP/RTP ports in SIP messages, select yes. |
| Otherwise, select no. |
| The default is no. |
|
|
NAT Keep Alive Enable | To send the configured NAT keep alive message periodically, select yes. Otherwise, select |
| no. |
| The default is no. |
|
|
NAT Keep Alive Msg | Enter the keep alive message that should be sent periodically to maintain the current |
| NAT mapping. If the value is $NOTIFY, a NOTIFY message is sent. If the value is |
| $REGISTER, a REGISTER message without contact is sent. |
| The default is $NOTIFY. |
|
|
NAT Keep Alive Dest | Destination that should receive NAT keep alive messages. If the value is $PROXY, |
| the messages are sent to the current or outbound proxy. |
| The default is $PROXY. |
|
|
|
| Linksys SPA9000 Administrator Guide |
|
| |
|
|
| |||
| Document Version 3.01 |
|
|
| |
|
|
|
|