
Chapter 6 SPA9000 Field Reference
|
| FXS 1/2 Tab |
|
|
|
| |
| FAX Passthru Codec | Select the codec for fax passthrough, G711u or G711a. | |
|
| The default is G711u. | |
|
|
| |
| DTMF Process INFO | (Not in PAP2T) To use the DTMF process info feature, select yes. Otherwise, select no. | |
|
| The default is yes. | |
|
|
| |
| FAX Codec Symmetric | To force the SPA9000 to use a symmetric codec during fax passthrough, select yes. | |
|
| Otherwise, select no. | |
|
| The default is yes. | |
|
|
| |
| DTMF Process AVT | (Not in PAP2T) To use the DTMF process AVT feature, select yes. Otherwise, select no. | |
|
| The default is yes. | |
|
|
| |
| FAX Passthru Method | Select the fax passthrough method: None, NSE, or ReINVITE. | |
|
| The default is NSE. | |
|
|
| |
| DTMF Tx Method | Select the method to transmit DTMF signals to the far end: InBand, AVT, INFO, Auto, | |
|
| InBand+INFO, or AVT+INFO. InBand sends DTMF using the audio path. AVT sends | |
|
| DTMF as AVT events. INFO uses the SIP INFO method. Auto uses InBand or AVT based | |
|
| on the outcome of codec negotiation. | |
|
| The default is Auto. | |
|
|
| |
| FAX Process NSE | To use the fax process NSE feature, select yes. Otherwise, select no. | |
|
| The default is yes. | |
|
|
| |
| Hook Flash Tx Method | Select the method for signaling hook flash events: None, AVT, or INFO. None does not | |
|
| signal hook flash events. AVT uses RFC2833 AVT (event = 16). INFO uses SIP INFO | |
|
| with the single line signal=hf in the message body. The MIME type for this message body | |
|
| is taken from the Hook Flash MIME Type setting. | |
|
| The default is None. | |
|
|
| |
| FAX Disable ECAN | If enabled, this feature automatically disables the echo canceller when a fax tone is | |
|
| detected. To use this feature, select yes. Otherwise, select no. | |
|
| The default is no. | |
|
|
| |
| Release Unused Codec | This feature allows the release of codecs not used after codec negotiation on the first call, | |
|
| so that other codecs can be used for the second line. To use this feature, select yes. | |
|
| Otherwise, select no. | |
|
| The default is yes. | |
|
|
| |
| FAX Enable T38 | To enable the use of the | |
|
| The default is yes. | |
|
|
| |
| FAX Tone Detect Mode | This parameter has three possible values: | |
|
| • caller or callee - SPA will detect FAX tone whether it is callee or caller | |
|
| • caller only - SPA will detect FAX tone only if it is the caller | |
|
| • callee only - SPA will detect FAX tone only if it is the callee | |
|
| The default is caller or callee. | |
|
|
|
|
|
| Linksys SPA9000 Administrator Guide |
|
| |
|
|
| |||
| Document Version 3.01 |
|
|
| |
|
|
|
|