Cisco Systems SPA9000 manual SIP Tab, SIP Parameters

Chapter 6 SPA9000 Field Reference

SIP Tab

SIP Tab

This section describes the fields for the following headings on the SIP tab:

•SIP Parameters, page 6-7

•SIP Timer Values (sec), page 6-8

•Response Status Code Handling, page 6-10

•RTP Parameters, page 6-10

•SDP Payload Types, page 6-11

•NAT Support Parameters, page 6-13

•PBX Parameters, page 6-14

•Internal Music Source Parameters, page 6-17

•Auto Attendant Parameters, page 6-18

•PBX Phone Parameters, page 6-21

SIP Parameters

Field	Description
Max Forward	SIP Max Forward value, which can range from 1 to 255.
	The default is 70.
Max Redirection	Number of times an invite can be redirected to avoid an infinite loop.
	The default is 5.
Max Auth	Maximum number of times (from 0 to 255) a request may be challenged.
	The default is 2.
SIP User Agent Name	User-Agent header used in outbound requests.
	The default is $VERSION. If empty, the header is not included. Macro expansion of $A
	to $D corresponding to GPP_A to GPP_D allowed.
SIP Server Name	Server header used in responses to inbound responses.
	The default is $VERSION.
SIP Reg User Agent Name	User-Agent name to be used in a REGISTER request. If this is not specified, the <SIP User
	Agent Name> is also used for the REGISTER request.
	The default is blank.
SIP Accept Language	Accept-Language header used. There is no default (this indicates SPA9000 does not
	include this header). If empty, the header is not included.
DTMF Relay MIME Type	MIME Type used in a SIP INFO message to signal a DTMF event.
	The default is application/dtmf-relay.

	Linksys SPA9000 Administrator Guide
Document Version 3.01		6-7